Главная
Приборы
Инструкции и документации
service
Программы
Прошивки
Утилиты
FAQ
Ремонт
Контакты
Карта сайта

IQ Basic / GPS

 Firmware IQ-BASIC-GPS version 1.2.01 13.01.2010 
 
 
 
 [Немецкий…] [Английский…] [Испанский…] [Французский…] [Итальянский…

 

 Firmware IQ-Basic-GPS vers. 1.2.02 13.01.2010 
 
  New beta version. Please see release notes!
 
 [Немецкий…] [Английский…] [Испанский…] [Французский…] [Итальянский…

 

 Release note to firmware 1.2.02 13.01.2010 
 
 Release note to beta version 1.2.02 in english only.
 
 [Английский…

 

  19.12.2009 
 
 
 
 [Немецкий…

 

 USB-driver for WIN 98 — 2000 — XP 06.11.2009 
 
 This USB-driver must be installed if you want to use the flasher software!
When Flychart was installed, this driver automatically is installed!
 
 [Немецкий…] [Английский…

 

 USB-Prolific driver, latest version for WIN VISTA/WIN 7 22.01.2010 
 
 This driver must be installed if you want to use the flasher software! When Flychart was installed, this driver automatically was installed.
 
 [Немецкий…] [Английский…

 

 Flasher for IQ-BASIC-GPS ver. 1_4 06.11.2009 
 
 Prelimary flasher for IQ-BASIC-GPS

Attention! Please first install the PROLIFIC USB-driver on your PC. This is the correct USB driver for the IQ-BASIC-GPS! Otherwise the IQ-BASIC-GPS will not be recognised by your PC-OP-system!

We recomend to safe all files generared by unzipping the flasher directory and download of the firmware file in a special directory as C:\Program\IQ-BASIC-GPS\. ( flasher software, release notes and the *.moc files )
 

 [Немецкий…] [Английский…

 

 Flasher Software Version 1.5 WIN -VISTA 06.11.2009 
 
 Improved flsher version 1.5 for WIN-VISTA
 
 [Немецкий…] [Английский…

 

 Advise how to change a COM port when the flasher can’t recognise the vario 06.11.2009 
 
 Detailed information how to change a COM PORT under the PC-System. The Flasher software needs a COMP port below port 9!
 
 [Немецкий…] [Английский…] [Французский…

 

IQ Compeo (старый Galileo)

 COMPEO-old special competition version with ALT-GPS 14.07.2009 
 
 This version allows to show the GPS altitide in an user defined field.

The CIVL decided to use the barometric altitude
now for judgement of airspace violations.
See www.chabre2009.com-> Local Regs/Docs -> Altitude addendum

On the other hand the PWCA decided, that for the next event in Buzet, Croatia there will be altitude restrictions
defined by the GPS altitude. Brauniger offers special competition firmware versions for the COMPEO-old with a new
userfield «Alt GPS». The userfield is not available in Flychart and we don’t change the manual for that.
 

 [Немецкий…] [Английский…

 

 iMPORTANT LINK FOR COMPETITION PILOTS AND SCOREKEEPERS 14.07.2009 
 
 
 
 [Ссылка…

 

 Upload Software for IQCOMPEO (old)/galileo 15.02.2009 
 
 This software is necessary for upload updates to the IQCOMPEO/galileo. You also must download the Updatefile *.hec file itself! Please read HELP file.
 
 [Немецкий…] [Английский…

 

 Prolific-Driver for USB-serial adapters WIN-XP/2000/NT 15.02.2009 
 
 Importand advise to USB-serial adapters.

Most new notebook computers only have USB ports and no longer the COM port. But there are a lot of USB-serial adapters available to realise a COM port.
The most used driver for this adapters is a Polific USB driver. We looked for a reliable one and you can find it here zipped for download. First, please look at your PC system information for the driver your adapter is using. If an other than Prolific is installed, please look for a newer version at the WWW download and install it!
Please install and test it.
 

 [Немецкий…] [Английский…

 

 Prolific driver to USB-Serial Adapter for WIN-VISTA 14.05.2009 
 
 USB driver for all instruments, designed for WINDOWS VISTA.
 
 [Немецкий…] [Английский…

 

IQ Compeo+

 Release notes for IQ-COMPEO+ actual/beta version 31.10.2009 
 
 Version 3.29 o
 
 [Немецкий…] [Английский…

 

 New Betaversion for the COMPEO+ Vers. 3.29 o 31.10.2009 
 
 Please see release note.
 
 [Немецкий…] [Английский…

 

 iMPORTANT LINK FOR COMPETITION PILOTS AND SCOREKEEPERS 14.07.2009 
 
 
 
 [Ссылка…

 

 COMPEO+ version 3.29 d 21.09.2009 
 
 Latest Beta version sept. 2009
 
 [Немецкий…] [Английский…

 

 Flasher for new IQ-COMPEO+ and COMPETINO+ V 1.3 15.02.2009 
 
 Flasher software tool for uploading new firmware to the IQ-COMPETINO+ and COMPEO+. The update file *.moc must uploaded separately!
 
 [Немецкий…] [Английский…

 

 Prolific-Driver for USB-serial adapters WIN-XP/2000/NT 15.02.2009 
 
 Importand advise to USB-serial adapters.

Most new notebook computers only have USB ports and no longer the COM port. But there are a lot of USB-serial adapters available to realise a COM port.
The most used driver for this adapters is a Polific USB driver. We looked for a reliable one and you can find it here zipped for download. First, please look at your PC system information for the driver your adapter is using. If an other than Prolific is installed, please look for a newer version at the WWW download and install it!
Please install and test it.
 

 [Немецкий…] [Английский…

 

 Prolific driver to USB-Serial Adapter for WIN-VISTA 14.05.2009 
 
 USB driver for all instruments, designed for WINDOWS VISTA.
 
 [Немецкий…] [Английский…

 

 Advise about changing an USB port for connecting a COMPEO/COMPETINO to a PC 15.02.2009 
 
 Helpful hints how to change USB ports under the Profilic USB driver.
 
 [Немецкий…] [Английский…

 

 Compeo+ firmware version 3.28k 21.09.2009 
 
 Still actual version
 
 [Немецкий…] [Английский…

 

 USB-Prolific driver, latest version for WIN VISTA/WIN 7 22.01.2010 
 
 This driver must be installed if you want to use the flasher software! When Flychart was installed, this driver automatically was installed.
 
 [Немецкий…] [Английский…

 

 Flasher Software Version 1.5 WIN -VISTA 06.11.2009 
 
 Improved flsher version 1.5 for WIN-VISTA
 
 [Немецкий…] [Английский…

 

 Advise how to change a COM port when the flasher can’t recognise the vario 06.11.2009 
 
 Detailed information how to change a COM PORT under the PC-System. The Flasher software needs a COMP port below port 9!
 
 [Немецкий…] [Английский…] [Французский…

 

IQ Competino

 iMPORTANT LINK FOR COMPETITION PILOTS AND SCOREKEEPERS 14.07.2009 
 
 
 
 [Ссылка…

 

 COMPETINO (old) firmware version 1.21 15.02.2009 
 
 This update contents new functions, please also download the new manual which will be available in a fey days too!
Before the update, please close all active software at your PC.
For updating the firmware, flight memory must be cleared!
( Menue — Basic Settings — Erase all records )
 
 [Немецкий…] [Английский…] [Французский…

 

 Prolific-Driver for USB-serial adapters WIN-XP/2000/NT 15.02.2009 
 
 Importand advise to USB-serial adapters.

Most new notebook computers only have USB ports and no longer the COM port. But there are a lot of USB-serial adapters available to realise a COM port.
The most used driver for this adapters is a Polific USB driver. We looked for a reliable one and you can find it here zipped for download. First, please look at your PC system information for the driver your adapter is using. If an other than Prolific is installed, please look for a newer version at the WWW download and install it!
Please install and test it.
 

 [Немецкий…] [Английский…

 

 Flasher software for IQ-COMPETINO 15.02.2009 
 
 Flasher software for the COMPETINO. This software is uploading new firmware to the COMPETINO. Please read the advises carfully.
 
 [Немецкий…] [Английский…

 

  Advises to COMPETINO flasher software. 15.02.2009 
 
 
 
 [Немецкий…

 

 Prolific driver to USB-Serial Adapter for WIN-VISTA 14.05.2009 
 
 USB driver for all instruments, designed for WINDOWS VISTA.
 
 [Немецкий…] [Английский…

 

 Advise about changing an USB port for connecting a COMPEO/COMPETINO to a PC 15.02.2009 
 
 Helpful hints how to change USB ports under the Profilic USB driver.
 
 [Немецкий…] [Английский…

 

 Flasher Software Version 1.5 WIN -VISTA 06.11.2009 
 
 Improved flsher version 1.5 for WIN-VISTA
 
 [Немецкий…] [Английский…

 

IQ Competino+

 Release notes for IQ-COMPETINO+ actual version 17.09.2009 
 
 
 
 [Немецкий…] [Английский…

 

 iMPORTANT LINK FOR COMPETITION PILOTS AND SCOREKEEPERS 14.07.2009 
 
 
 
 [Ссылка…

 

 COMPETINO+ version 3.07e 21.09.2009 
 
 Latest version
 
 [Немецкий…] [Английский…

 

 Flasher for new IQ-COMPEO+ and COMPETINO+ V 1.3 15.02.2009 
 
 Flasher software tool for uploading new firmware to the IQ-COMPETINO+ and COMPEO+. The update file *.moc must uploaded separately!
 
 [Немецкий…] [Английский…

 

 Prolific-Driver for USB-serial adapters WIN-XP/2000/NT 15.02.2009 
 
 Importand advise to USB-serial adapters.

Most new notebook computers only have USB ports and no longer the COM port. But there are a lot of USB-serial adapters available to realise a COM port.
The most used driver for this adapters is a Polific USB driver. We looked for a reliable one and you can find it here zipped for download. First, please look at your PC system information for the driver your adapter is using. If an other than Prolific is installed, please look for a newer version at the WWW download and install it!
Please install and test it.
 

 [Немецкий…] [Английский…

 

 Prolific driver to USB-Serial Adapter for WIN-VISTA 14.05.2009 
 
 USB driver for all instruments, designed for WINDOWS VISTA.
 
 [Немецкий…] [Английский…

 

 Advise about changing an USB port for connecting a COMPEO/COMPETINO to a PC 15.02.2009 
 
 Helpful hints how to change USB ports under the Profilic USB driver.
 
 [Немецкий…] [Английский…

 

 USB-Prolific driver, latest version for WIN VISTA/WIN 7 22.01.2010 
 
 This driver must be installed if you want to use the flasher software! When Flychart was installed, this driver automatically was installed.
 
 [Немецкий…] [Английский…

 

 Flasher Software Version 1.5 WIN -VISTA 06.11.2009 
 
 Improved flsher version 1.5 for WIN-VISTA
 
 [Немецкий…] [Английский…

 

 Advise how to change a COM port when the flasher can’t recognise the vario 06.11.2009 
 
 Detailed information how to change a COM PORT under the PC-System. The Flasher software needs a COMP port below port 9!
 
 [Немецкий…] [Английский…] [Французский…

 

IQ One+

 Prolific-Driver for USB-serial adapters WIN-XP/2000/NT 15.02.2009 
 
 Importand advise to USB-serial adapters.

Most new notebook computers only have USB ports and no longer the COM port. But there are a lot of USB-serial adapters available to realise a COM port.
The most used driver for this adapters is a Polific USB driver. We looked for a reliable one and you can find it here zipped for download. First, please look at your PC system information for the driver your adapter is using. If an other than Prolific is installed, please look for a newer version at the WWW download and install it!
Please install and test it.
 

 [Немецкий…] [Английский…

 

 Prolific driver to USB-Serial Adapter for WIN-VISTA 14.05.2009 
 
 USB driver for all instruments, designed for WINDOWS VISTA.
 
 [Немецкий…] [Английский…

 

 Advise about changing an USB port for connecting a COMPEO/COMPETINO to a PC 15.02.2009 
 
 Helpful hints how to change USB ports under the Profilic USB driver.
 
 [Немецкий…] [Английский…

 

 USB-Prolific driver, latest version for WIN VISTA/WIN 7 22.01.2010 
 
 This driver must be installed if you want to use the flasher software! When Flychart was installed, this driver automatically was installed.
 
 [Немецкий…] [Английский…

 

 Advise how to change a COM port when the flasher can’t recognise the vario 06.11.2009 
 
 Detailed information how to change a COM PORT under the PC-System. The Flasher software needs a COMP port below port 9!
 
 [Немецкий…] [Английский…] [Французский…